Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Golf
    4. : How do you replace the heating radiator of the Volkswagen Golf 7?

Volkswagen Golf - Video tutorial

Model: Volkswagen Golf Golf VII, Golf 7, MK 7 - Years 2012-2019
Part: Passenger compartment heating radiator
Operation: How do you replace the heating radiator of the Volkswagen Golf 7?

In order to replace the heating radiator of the Volkswagen Golf, it is necessary to completely dismantle the dashboard to access the components located inside it: here it will be possible to remove the clips that secure the glove compartment on the passenger side and then proceed to remove all the other trims and coverings. The radiator will now be accessible and it will be possible to detach the pipes and screws that secure it to its supports; once the old radiator is removed, it will be possible to insert the new one, securing and connecting it properly.


Posted on 30 November 2023 by ScegliAuto

    Frequently Asked Questions

    • Golf 2012-2019 - Why does the hot air in the Volkswagen Golf 7 not work? Read Answer
    • Golf 2012-2019 - Why is the Golf 7 heating not working? Read Answer
    • Golf 2008-2012 - If my Volkswagen Golf 6 has heating problems, what could be the cause? Read Answer
    • Golf 2012-2019 - What problems could there be with the heating radiator on the Volkswagen Golf 7? Read Answer
    • Golf 2012-2019 - Why doesn't the heating of a Golf 7 work? Read Answer
    • Golf 2012-2019 - What to do if problems with hot air occur on a Volkswagen Golf 7? Read Answer
    • Golf 2012-2019 - What to do when the Volkswagen Golf 7 has a heating problem? Read Answer
    • Golf 2008-2012 - Why doesn't hot air work on a Volkswagen Golf? Read Answer

How to reset the TPMS light of the Volkswagen Polo 2011

The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition.

Watch the video!


by ScegliAuto

More videos