Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Golf
    4. : How do you replace the heating radiator of the Volkswagen Golf 7?

Volkswagen Golf - Video tutorial

Model: Volkswagen Golf Golf VII, MK 7, Golf 7 - Years 2012-2019
Part: Passenger compartment heating radiator
Operation: How do you replace the heating radiator of the Volkswagen Golf 7?

The procedure for replacing the cabin heating radiator on the Volkswagen Golf requires completely dismantling the dashboard in order to access the components located inside it: the heating radiator will be located in the part of the dashboard immediately next to the driver's footwell. It will be possible to remove the radiator by disconnecting the connecting pipes attached to it; in this way, the new replacement part can be inserted, fixed, and connected properly. After installation, everything will need to be covered with the corresponding panel.


Posted on 23 January 2024 by ScegliAuto

    Frequently Asked Questions

    • Golf 2012-2019 - Why does the hot air in the Volkswagen Golf 7 not work? Read Answer
    • Golf 2012-2019 - Why is the Golf 7 heating not working? Read Answer
    • Golf 2008-2012 - If my Volkswagen Golf 6 has heating problems, what could be the cause? Read Answer
    • Golf 2012-2019 - What problems could there be with the heating radiator on the Volkswagen Golf 7? Read Answer
    • Golf 2012-2019 - Why doesn't the heating of a Golf 7 work? Read Answer
    • Golf 2012-2019 - What to do if problems with hot air occur on a Volkswagen Golf 7? Read Answer
    • Golf 2012-2019 - What to do when the Volkswagen Golf 7 has a heating problem? Read Answer
    • Golf 2008-2012 - Why doesn't hot air work on a Volkswagen Golf? Read Answer

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos