Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the key battery for a Porsche 911.

Model: Porsche 911 997 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Key

See other generations:
Video tutorial

In this very short video guide today, we will see how to replace the battery of a Porsche 911 key, specifically the model produced from 2005 to 2010. So, first, using a small plastic lever, we will remove the front part of the key as shown in the video, and then remove the internal button panel.

Once that is done, we can take out the old battery from the key and replace it by inserting a new one with the positive side facing up. Finally, we will close everything up by following the reverse procedure.

The battery needed for this key is the CR2032, 3V.


Posted on 10 December 2025 by ScegliAuto


Related tutorials

How to Replace the Key Battery of a Porsche 911
How to Replace the Key Battery of a Porsche 911
Porsche 911 (1997-2005 / 996) Start by inserting the tip of a small flathead screwdriver into the key of your Porsche 911 and prying it open. This will expose the dead battery. Pr…
How to Replace the Key Fob Battery in a Porsche 911?
How to Replace the Key Fob Battery in a Porsche 911?
Porsche 911 (2019-2026 / 992) To replace the battery in a Porsche 911 key fob, slide the key out from the top of the device by simply pulling it from its housing. Once the key is …
How to Replace the Battery in a Porsche 911 Key
Porsche 911 (2005-2011 / 997) How do you replace the dead battery in a Porsche 911 key? Let's see how to do it: Take your remote and use a screwdriver to pry between the key and t…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos