Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Fob Battery in a Porsche 911?

Model: Porsche 911 992 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Key

See other generations:
Video tutorial

To replace the battery in a Porsche 911 key fob, slide the key out from the top of the device by simply pulling it from its housing. Once the key is removed, use a screwdriver to pry open the two side panels of the key fob. Removing these panels will give you access to the battery compartment, where you will need to take out the old battery and replace it with a new one. After inserting the new battery, close the key fob and check that it works.


Updated on 25 June 2026 by ScegliAuto


Related tutorials

Replacing the Key Fob Battery for the Porsche 911
Replacing the Key Fob Battery for the Porsche 911
Porsche 911 (2011-2019 / 991) This guide provides step-by-step instructions for disassembling and replacing the battery in the key fob for the Porsche 911. First, take your key fo…
How to Replace the Key Fob Battery for the Porsche 911?
How to Replace the Key Fob Battery for the Porsche 911?
Porsche 911 (2011-2019 / 991) To replace the key fob battery for the Porsche 911, pull out the key located inside the device from the top. Once removed, pry off the circular cover…
How to Replace the Key Battery of a Porsche 911
How to Replace the Key Battery of a Porsche 911
Porsche 911 (1997-2005 / 996) Start by inserting the tip of a small flathead screwdriver into the key of your Porsche 911 and prying it open. This will expose the dead battery. Pr…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos