Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Bumper on a Porsche 911?

Model: Porsche 911 991 - Years 2011-2019
Part: Rear bumper

To remove the rear bumper on a Porsche 911, loosen the screws located inside the wheel wells of the rear wheels, completely removing them. Then, proceed to loosen the screws under the rear spoiler and those located at the central lower part of the bumper. Once all these screws are removed, you can detach the clips that secure the bumper in place, completely removing it. After removal, you can install the new bumper, securing it properly.

Updated on 28 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the spark plugs of the Porsche 911?
How do you replace the spark plugs of the Porsche 911?
Porsche 911 (2011-2019 / 991) In order to replace the spark plugs of the Porsche 911, you need to lift the car with a jack or a lift so that it is possible to loosen the screws th…
Removing the Wiper Motor on Porsche 911
Removing the Wiper Motor on Porsche 911
Porsche 911 (1982-1991 / ) Removing the wiper motor from the Porsche 911? Start by removing the rear wiper motor. Use a socket wrench to remove the wiper arm from the rear wind…
How to Remove the Front Bumper of a Porsche 911
How to Remove the Front Bumper of a Porsche 911
Porsche 911 (2005-2011 / 997) To remove the front bumper of the Porsche 911, first remove the inner covers of the front wheel wells and the front headlights. Inside their housings…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos