Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Tail Lights on the Porsche Cayenne

Model: Porsche Cayenne MK 2 - Years 2010-2017
Part: Tail light

Follow these step-by-step instructions to remove and replace the tail lights on the Porsche Cayenne. First, open the trunk and remove the trunk panel by unscrewing the screws; then remove the tail light by disconnecting the light connector, as shown in the video. Next, unscrew the side screws of the other tail light and disconnect the electrical connector to remove it as well; replace the bulbs if necessary, following the video until the end for reassembly!

Updated on 29 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Tail Light of the Porsche Cayenne
How to Replace the Rear Tail Light of the Porsche Cayenne
Porsche Cayenne (2017-2026 / MK 3) Today's instructions will show you the steps to remove and replace the rear tail light and its bulbs on the Porsche Cayenne. First, move to the back …
How to Remove the Front Headlight of a Porsche Cayenne
How to Remove the Front Headlight of a Porsche Cayenne
Porsche Cayenne (2003-2010 / MK 1) Before starting, open the hood of your Porsche Cayenne. Begin by prying off and removing the bolt cover that secures the headlight to the frame. Next…
Replacement of the rear headlight bulbs of the Porsche Cayenne
Replacement of the rear headlight bulbs of the Porsche Cayenne
Porsche Cayenne (2003-2010 / MK 1) Following these brief and simple instructions, we will see how to replace the bulbs of the rear light of the Porsche Cayenne. First, open the rear do…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos