Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the Rear Headlight

Model: Porsche Cayenne MK 1 - Years 2003-2010
Part: Tail light

Removing the rear headlight is extremely simple and does not require special experience or tools. Simply open the trunk and remove the side mounting pin of the headlight: once the pin is removed, pull the headlight out of its housing, being careful not to damage it where it is fitted into the body. After removing the headlight from its housing, replace the bulbs if necessary, and then reverse the process for installation, carefully seating it in its housing and tightening the corresponding mounting pin.

Updated on 11 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the rear headlight bulbs of the Porsche Cayenne
Replacement of the rear headlight bulbs of the Porsche Cayenne
Porsche Cayenne (2003-2010 / MK 1) The following steps will show us how to disassemble and replace the bulbs of the rear headlight of the Porsche Cayenne. First, we open the rear hatch…
Replacement of the rear headlight bulbs of the Porsche Cayenne
Replacement of the rear headlight bulbs of the Porsche Cayenne
Porsche Cayenne (2003-2010 / MK 1) Following these brief and simple instructions, we will see how to replace the bulbs of the rear light of the Porsche Cayenne. First, open the rear do…
How to Replace the Rear Headlight on the Porsche Cayenne
How to Replace the Rear Headlight on the Porsche Cayenne
Porsche Cayenne (2010-2017 / MK 2) To replace the rear headlight on this vehicle model, find the useful information on how to proceed in the description below and in the video. Once yo…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos