|
Do it yourself
| |||
| ||||
How to solve the problem of water on the Porsche Cayenne
Model: Porsche Cayenne
MK 2
- Years:
2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Video tutorial
Let's see how to solve a water problem in the interior of the Porsche Cayenne, caused by the clogging of the drainage pipes of the panoramic roof; in fact, they were clogged with leaves and dirt and the water, unable to flow, overflows from the gutter and seeps into the rear pillar, flooding the cargo area and damaging electronic components such as the audio system amplifier. We raise the vehicle to its highest setting, open the roof completely to access the drainage channels, find the drainage holes in the two rear corners of the roof gutter, and pour a little soapy water from a bottle into one of the drains. We check from the bottom of the vehicle (in the area of the rear wheel arch) where the water should come out. If it comes out little or nothing, the drain is clogged. To clean the drain definitively, we extend the drainage pipe from under the vehicle: at the lower end we will find a kind of rubber nozzle. Carefully cut off only the end tip of this nozzle with scissors (it is only a few millimeters), this will remove the most susceptible part to blockages and permanently open the passage. Pour more soapy water into the drain to verify that the water now flows freely.
Posted on 4 November 2025 by ScegliAuto
Related tutorials
Porsche Cayenne
(2010-2017 /
MK 2)
If you don't know where all the various fuses are located in your Porsche Cayenne second generation, don't worry because this guide provides all the …
Porsche Cayenne
(2010-2017 /
MK 2)
To check the oil level of the Porsche Cayenne, we need to turn on the instrument panel and press the menu button on the steering wheel to access the …
Porsche Cayenne
(2003-2010 /
MK 1)
Before starting, open the hood of your Porsche Cayenne. Begin by prying off and removing the bolt cover that secures the headlight to the frame. Next…
Other guides you may be interested in
|
How to Reset the Tire Pressure Light on a MG ZS?
On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.018
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |