Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Manufacturer Error of the Ram 700

Model: RAM RAM Various
Part: Warning light – error code

Video tutorial

In this video, the YouTuber identifies a significant issue with the tailgate of the Ram 700 pick-up: the heavy tailgate, weighing around 121 lbs, is supported only by two thin rubber rods, which wear out very quickly; furthermore, the hinges of the tailgate loosen over time.

The way to close the tailgate also contributes to damaging the rubber rods; as seen in the video, if these rods remain inside the tailgate when closing, they bend and last even less.

Be very careful when closing to avoid prematurely damaging a mechanism that is already weak.


Updated on 2 November 2026 by ScegliAuto


Related tutorials

How to know the fuse diagram of a Dodge RAM
RAM RAM Various The first fuse diagram of a Dodge RAM vehicle shown in the video includes fuses assigned to: ignition switch, manual transmission, anti-lock brake sy…
How to Replace the Key Battery of the RAM TRX
How to Replace the Key Battery of the RAM TRX
RAM RAM Various Replacing the key battery of your RAM TRX is undoubtedly one of the simplest tasks you can perform independently. Below, we will discover all the nec…
Where are the fuses located in the RAM 1500?
RAM RAM Various Each fuse in the RAM 1500 is positioned within one of the fuse boxes installed in the vehicle: in this type of vehicle, you will find a single box. T…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos