Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the reverse light bulbs in the RAM 3500?

Model: RAM 3500 DS, DJ, MK 4 - Years 2009-2019
Part: Tail light bulb

Replacing the reverse light bulbs, in the RAM 3500, is a very simple and fast operation, let's see how to proceed in this tutorial. We only need a Torx T20 key and obviously some spare bulbs, in the case of the video it is LED bulbs. Let's start by opening the body door and unscrewing the two Torx fixing screws of the headlight. Once this is done, remove it from the bodywork and extract the reverse light bulb holder by turning it counterclockwise. Finally, we replace the bulb, reassemble everything and repeat the operation for the opposite headlight, if necessary.

Posted on 17 December 2021 by ScegliAuto

Video tutorial

Related tutorials

How to replace the headlights on the Dodge RAM 3500
How to replace the headlights on the Dodge RAM 3500
RAM 3500 (1993-2002 / BE, BR, MK 2) Let's find out in this guide the steps that will allow us to remove and replace the front lights of the Dodge RAM 3500. First, let's move to the fron…
How to replace Dodge RAM 3500 low beam and fog light bulbs
How to replace Dodge RAM 3500 low beam and fog light bulbs
RAM 3500 (2009-2019 / DS, DJ, MK 4) To change the headlight lights of the Dodge RAM 3500 we start by raising the bonnet, remove the 3 screws that hold the headlight (2 to the side and 1…
Where is the fuse box of the new RAM 3500
Where is the fuse box of the new RAM 3500
RAM 3500 (2019-2026 / MK 5, DT) In this new mini guide of ours dedicated to your brand new RAM 3500 from 2023, we're going to find out where the box containing all the various vehic…

Other guides you may be interested in

How to Remove the Engine Oil Filter of the Peugeot 308

How do you remove the engine oil filter of the Peugeot 308? Follow this guide to proceed with the replacement. Open the car door and pull up the engine compartment release lever located at the bottom left of the dashboard, then lift the front bonnet and secure it. Using a socket wrench, unscrew the large securing bolt of the container cap where the oil filter is located (engine compartment under the ventilation pipe). Drain the used oil from under the engine sump. Remove the worn oil filter and position a new one, ensuring it adheres well around the walls of the housing. Finally, refit the ventilation pipe and top up the engine oil. Close the front bonnet last.

Watch the video!


by ScegliAuto

More videos