Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. RAM
  4. :
  5. 2500
  6. : How to install the Uconnect 8.4 car radio on the RAM 2500

RAM 2500 - Video tutorial

Model: RAM 2500 MK 4, DS, DJ, D2 - Years 2009-2019
Part: Car stereo
Operation: How to install the Uconnect 8.4 car radio on the RAM 2500

In this video tutorial we will see how to disassemble the stock car stereo, replacing it with the Uconnect 8.4 one, on the RAM 2500, in simple steps. First we get on board the car and start by removing the plastic cover of the central instrumentation; now unscrew the screws of the multimedia system, which we find below, to remove it, disconnecting the electrical connectors on the back. At this point we replace the multimedia system with the new one, making the appropriate changes; then we reassemble the central plastic again, following the video tutorial to the end!


Posted on 9 April 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos