Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Radio from the Dodge RAM 2500 Mk4

Model: RAM 2500 MK 4, D2, DS, DJ - Years 2009-2019
Part: Car stereo

This guide shows how to disassemble the radio from the Dodge RAM 2500 Mk4. The first step is to remove the two Torx T20 screws located in the upper glove compartment. Unscrew the other Torx screw found in the small storage compartment in the center console, and using a plastic trim tool, pry off the radio's trim bezel by leveraging the sides and checking if the retaining clips are still attached to the bezel. At this point, you can remove the electrical connectors and take off the bezel. Unscrew the four 7 mm bolts to extract the module. Disconnect the electrical cables and remove the radio.

Updated on 9 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Headlight Bulb on a Dodge Ram 2500
How to Replace the Rear Headlight Bulb on a Dodge Ram 2500
RAM 2500 (2009-2019 / MK 4, D2, DS, DJ) To replace the rear headlight bulb on a Dodge Ram 2500, lower the tailgate to access the screws that secure the headlight. You can then pull the head…
How to Replace Brake Pads on the Dodge RAM 2500
How to Replace Brake Pads on the Dodge RAM 2500
RAM 2500 (2009-2019 / MK 4, D2, DS, DJ) This guide shows the procedure for removing and replacing the front and rear brake pads on the Dodge RAM 2500. First, lift the vehicle and start by r…
Replacing the Front Brake Pads on a Dodge RAM 2500 MK4
Replacing the Front Brake Pads on a Dodge RAM 2500 MK4
RAM 2500 (2009-2019 / MK 4, D2, DS, DJ) This brief guide shows how to remove and replace the front brake pads on a fourth-generation Dodge RAM 2500 in simple and quick steps. First, lift th…

How to Replace the Remote Battery for the Volvo XC40?

In this tutorial, you will see how to replace the battery in the remote for the Volvo XC40, a very simple and quick operation. For this, you will need a replacement battery of type CR2032 and possibly a small flathead screwdriver. First, remove the front cover by pressing the button on the metal ring, then locate the second button, press it as well, and remove the opposite cover. Next, open the circular cap, take out the old battery, and insert the new one in the opposite direction. Finally, reassemble everything.

Watch the video!


by ScegliAuto

More videos