Do it yourself
| ||||
|
RAM 1500 - Video tutorial
Model: RAM 1500
DJ, MK 4, DS
- Years 2009-2019 How to replace the airbag module on the Ram1500 but also on the 2500 and 3500. First we need to remove the shield that protects the passenger seat, sideways, and remove the two bolts in front of it and the three in the back that hold it in place the seat in its place. The module is under the central tunnel, but can only be accessed by removing the passenger seat, which can now be removed. Below this there are the electrical connectors that must be removed and now you can access the airbag module which is under the central tunnel, perfectly accessible and you can do all the necessary operations. To reassemble everything is very easy, we have seen that there are five screws in all to reposition.
Posted on 3 June 2022 by ScegliAuto
Other guides that may interest you |
How to open the bonnet of the Volkswagen PoloLet's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.013
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |