Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. RAM
    3. :
  3. 3500
    4. : How do i replace the remote control battery of the Dodge Ram 3500?

RAM 3500 - Video tutorial

Model: RAM 3500 MK 5, DT - Years 2019-2024
Part: Key
Operation: How do i replace the remote control battery of the Dodge Ram 3500?

In order to replace the battery of the Dodge Ram 3500 you have to remove the key from the top of the remote control, where the chrome is located. Once the key has been removed from its housing, it will be possible to pry it up with a tool such as a flat screwdriver. In this way, the remote control can be opened and the battery inside it can be removed, replacing it with a new spare part. After installing the new battery it will be possible to close the remote control by joining the two halves and insert the key in the upper part of the device.


Posted on 18 July 2022 by ScegliAuto



How to replace the Dodge RAM 3500 battery
RAM 3500 (2009-2019 / DS, DJ, MK 4) Below we will see the main steps that will allow us to disassemble and replace the battery of the Dodge RAM 3500. First we open the engine hood of ou
How to replace the RAM 3500 remote control battery?
RAM 3500 (2009-2019 / DS, DJ, MK 4) Replacing the dead battery of the RAM 3500 pick-up remote control is very simple, let's see how to proceed in this tutorial. For this operation we on
How to replace the RAM 3500 remote control battery?
RAM 3500 (2019-2024 / MK 5, DT) In this tutorial we can see how to replace the remote control battery of the RAM 3500 pick-up, a very simple and fast operation. To do this we will o

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos