Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the third brake light bulbs in the RAM 2500 pick-up?

Model: RAM 2500 DM, DH, D1, DC, MK 3, DR - Years 2002-2009
Part:

In this tutorial we can see how to replace the third brake light bulbs in the RAM 2500 pick-up, a very simple and fast operation. To do this we will only need a cross-tipped screwdriver and obviously the right spare bulbs, preferably the LED type. Let's start by climbing above the box, then unscrew the two fixing screws of the headlight. Once this is done, extract it from the bodywork and remove the bulb holder from the bulb to be replaced by turning it about 45 degrees anticlockwise. Once the spare part has been inserted, we follow the reverse procedure to reassemble everything.

Posted on 9 October 2022 by ScegliAuto

Video tutorial

Related tutorials

How to replace the headlight bulbs in the RAM 2500?
How to replace the headlight bulbs in the RAM 2500?
RAM 2500 (2002-2009 / DM, DH, D1, DC, MK 3, DR) In this tutorial we can see how to replace the headlight bulbs in the RAM 2500 pick-up, a very simple and fast operation. First let's make sure that …
How to reset the service in the RAM 2500 pick-up?
How to reset the service in the RAM 2500 pick-up?
RAM 2500 (2009-2019 / D2, MK 4, DS, DJ) In this video we can see how to reset the service in the RAM 2500 pick-up, a very simple and fast operation, to be carried out only after having carr…
How to replace the headlight bulbs in the RAM 2500 pickup?
How to replace the headlight bulbs in the RAM 2500 pickup?
RAM 2500 (2009-2019 / D2, MK 4, DS, DJ) In this tutorial we can see how to replace the headlight bulbs in the RAM 2500 pick-up, very simple operation. First of all we open the bonnet and di…

Other guides you may be interested in

How to Remove the Right Front Door Panel on an Opel Mokka

To remove the right front door panel on an Opel Mokka, follow these steps: disconnect the battery terminals located in the engine bay, then use a screwdriver to remove the screws from the upper door opening lever and the screws in the handle. Next, remove the covering plastic near the lever. Unscrew the remaining screws on the door panel and detach the retaining clips. Finally, pull the panel away with your hands and unclip it from the door (disconnect the power wiring and the release cable). Reassemble everything in reverse order.

Watch the video!


by ScegliAuto

More videos