Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. RAM
    3. :
  3. 1500
    4. : Replacement bulbs of the third rear light for Ram 1500 [USA]

RAM 1500 - Video tutorial

Model: RAM 1500 DJ, MK 4, DS - Years 2009-2019
Part: Rear light bulb
Operation: Replacement bulbs of the third rear light for Ram 1500 [USA]

It is possible to replace the rear lights (those located above the tailgate) with much more powerful and brighter bulbs, to do this it is necessary to proceed as follows: with a screwdriver, remove the fixing screws of the optical unit, remove the unit be careful not to lose the clips between the screw and the tailgate. Access the rear of the headlight and unscrew the bulbs. Take the new lamps and reassemble them by inserting them in their seat and rotating them. Put the clips back in place before reassembling the optical unit and re-tightening the screws.


Posted on 16 October 2022 by ScegliAuto

How do I reset the Jeep Compass Start & Stop system?

In order to reset the Start & Stop system of the Jeep Renegade you need to open the hood in order to access the battery located inside the engine compartment. The car's Start & Stop system is activated automatically and it will not be necessary to carry out any procedure to put it into operation. In order to reset the system it will therefore be necessary to disconnect the connector located in the lower part of the battery, so that it is reconnected after a few seconds. After the connection is successful, it will be possible to verify that the system has been reset.

Watch the video!


by ScegliAuto

More videos