Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. RAM
    3. :
  3. 3500
    4. : How to replace the RAM 3500 remote control battery?

RAM 3500 - Video tutorial

Model: RAM 3500 DT, MK 5 - Years 2019-2024
Part: Key
Operation: How to replace the RAM 3500 remote control battery?

In this tutorial we can see how to replace the remote control battery of the RAM 3500 pick-up, a very simple and fast operation. To do this we will only need a spare battery of the CR2032 type and a small screwdriver with a flat tip. First of all press the side button and extract the emergency metal key, after which we lever in the slot indicated in order to unlock the rear door. Once fully opened, we can remove the old battery and insert the spare one, taking care to position it with the positive pole facing upwards.


Posted on 17 December 2022 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos