Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil on a Ram ProMaster

Model: RAM Promaster MK 1 - Years 2014-2022
Part: Engine oil

If you want to tackle the engine oil change on this vehicle model, you can find useful information to follow in the description below and in the video. Once you open the hood, remove the oil filler cap, then locate the oil filter and proceed to unscrew it with the appropriate wrench, replacing it with the new one while ensuring to always replace the gasket. Next, lift the vehicle and unscrew the oil drain plug, collecting the oil in a pan placed on the floor. Wait for all the oil to drain out, then proceed to reattach both the drain plug and the new oil filter. Finally, fill the system with the new lubricant.

Updated on 16 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil and Oil Filter of the RAM Promaster
How to Change the Engine Oil and Oil Filter of the RAM Promaster
RAM Promaster (2014-2022 / MK 1) Below is the guide on how to perform routine maintenance by changing the engine oil and oil filter of the RAM Promaster Rapid. First, lift the vehicl…
Engine Oil and Oil Filter Replacement for the RAM Promaster
Engine Oil and Oil Filter Replacement for the RAM Promaster
RAM Promaster (2014-2022 / MK 1) In this brief guide, we will provide instructions for performing routine maintenance by replacing the engine oil and oil filter on the RAM Promaster.…
How to Reset the Oil Service Light on a RAM Promaster Van?
How to Reset the Oil Service Light on a RAM Promaster Van?
RAM Promaster (2014-2022 / MK 1) In this tutorial, you will see how to reset the oil service light on a RAM Promaster van, a very simple and quick operation. Before proceeding, make …

Other guides you may be interested in

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos