Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light Fixture Cover of a Ram Promaster City Mk1

Model: RAM Promaster City MK 1 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Interior dome light bulb

Video tutorial

This guide shows how to open the rear light fixture cover of the Ram Promaster City Mk1. To perform this operation, you need a small flathead screwdriver or a small plastic pry tool. The first step is to select the always-on mode of the fixture by pressing on the right side of the lens.

At this point, use the screwdriver to pry on the upper center part of the lens and the left side to release the piece from the clips. You can now remove the cover.

Reassembly is done in reverse order.


Updated on 26 July 2026 by ScegliAuto


Related tutorials

Where Are the Fuses on the RAM Promaster City?
Where Are the Fuses on the RAM Promaster City?
RAM Promaster City (2015-2022 / MK 1) The fuse boxes on the RAM Promaster City contain the fuses that control the operation of various devices in the vehicle: there are two boxes in this …
Where are the fuses located in the RAM Promaster City?
Where are the fuses located in the RAM Promaster City?
RAM Promaster City (2015-2022 / MK 1) Any fuse in the RAM Promaster City is located inside one of the designated fuse boxes installed on the vehicle: in this category of vehicle, you will…
Where are the fuses located in the RAM Promaster City?
Where are the fuses located in the RAM Promaster City?
RAM Promaster City (2015-2022 / MK 1) All fuse boxes in the RAM Promaster City contain the fuses that control the operation of the devices present in the vehicle: in this category of vehi…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos