Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Renault Megane?

Model: Renault Megane Megane 3, Megane III - Years 2008-2015
Part: Service warning light

The procedure for resetting the tire pressure warning light on the Renault Megane is carried out by first turning on the instrument panel, inserting the ignition key into the lock: when the instrument panel is turned on, it will be possible to navigate the menu that appears on the instrument panel, using the steering wheel controls. Once the voice related to the maintenance interval has been identified, it will be possible to press and hold the button located at the end of the lever on the right side of the steering wheel: you will need to continue holding the button until the light turns off.

Posted on 20 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Renault Megane Service warning light?
How do you reset the Renault Megane Service warning light?
Renault Megane (2008-2015 / Megane 3, Megane III) In order to reset the Renault Megane's Service warning light, you need to turn on the instrument panel by inserting the key and pressing the special …
How do I reset the Serivce light on the Renault Megane?
How do I reset the Serivce light on the Renault Megane?
Renault Megane (2015-2023 / Megane IV, Megane 4) To be able to reset the Renault Megane Service light, you need to insert the ignition key, so that the instrument panel can be turned on, noting that…
How do you reset the Service light on the Renault Megane?
How do you reset the Service light on the Renault Megane?
Renault Megane (2015-2023 / Megane IV, Megane 4) You can completely make the Service light disappear that is shown on the instrument panel of the Renault Megane by turning on the instrument panel, i…

Other guides you may be interested in

How to Replace the Timing Belt on a Lancia Delta

How do you replace the timing belt on a Lancia Delta? Lift the car on a column lift. Open the bonnet, remove the engine soundproofing panel and the metal timing belt cover. Using a suitable spanner, loosen the tensioner pulley and slide the belt off its seat. After fitting the new belt, use the spanner to tension the tensioner pulley, tightening until the belt has the correct tension (as previously installed). Finally, check the tensioner and the belt itself, and tighten everything with a socket wrench.

Watch the video!


by ScegliAuto

More videos