Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the instrument panel in the Renault Clio?

Model: Renault Clio MK 3, Clio 3, Clio III - Years 2005-2013
Part: Instrument cluster

In this tutorial we can see how to disassemble the instrument panel in the Renault Clio, an extremely simple and fast operation. First of all, make sure that the key is not inserted, so that you can operate in complete safety, then, using preferably a plastic spatula so as not to leave marks, unhook the frame of the panel. Next, locate the lower fixing clips, unhook them carefully so as not to damage them, and remove the panel from the dashboard. At this point, all that remains is to disconnect the connector and install any replacement following the reverse procedure.

Posted on 25 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Instrument Cluster of the Renault Clio
How to Remove the Instrument Cluster of the Renault Clio
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) Today's guide will show you the procedure to remove and replace the instrument cluster of the Renault Clio. First, get in the vehicle and start by re…
How to disassemble the instrument panel of the Renault Clio
How to disassemble the instrument panel of the Renault Clio
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) Today we will see the main instructions that will allow us to disassemble and replace the instrument panel of the Renault Clio dashboard. First of al…
How to Remove the Instrument Cluster on a Renault Clio
How to Remove the Instrument Cluster on a Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) How to disassemble the instrument cluster on a Renault Clio? Follow these steps for proper removal: use a plastic lever to remove the instrument clus…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos