Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Instrument Cluster on a Renault Clio

Model: Renault Clio Clio 3, MK 3, Clio III - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Instrument cluster

See other generations:
Video tutorial

How to disassemble the instrument cluster on a Renault Clio? Follow these steps for proper removal: use a plastic lever to remove the instrument cluster cover (without breaking the plastic clips) and detach it from the dashboard. Then, disconnect the power connectors for the instrument cluster (unscrew any screws if present).

After removing the instrument cluster from the dashboard, prepare to fit a new piece or reassemble the same one (repair the instrument cluster if necessary). Finally, proceed in reverse order for the assembly of the instrument cluster and the cover cap.


Updated on 3 March 2026 by ScegliAuto


Related tutorials

How to Remove the Instrument Cluster from a Renault Clio
How to Remove the Instrument Cluster from a Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) Before starting, sit in the driver's seat of your Renault Clio. Begin by prising off and removing the instrument cluster trim using a thin but sturdy…
How to Remove the Instrument Cluster of the Renault Clio
How to Remove the Instrument Cluster of the Renault Clio
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) Today's guide will show you the procedure to remove and replace the instrument cluster of the Renault Clio. First, get in the vehicle and start by re…
How to Remove the Instrument Cluster from a Renault Clio
How to Remove the Instrument Cluster from a Renault Clio
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) Today, you will see the main instructions that will allow you to remove and replace the instrument cluster of the Renault Clio dashboard. First, get …

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos