Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Removing the Cabin Fan of the Renault Kangoo

Model: Renault Kangoo MK 2, FC, FW - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Blower motor

See other generations:
Video tutorial

This guide provides the main information needed to remove and replace the cabin fan of the Renault Kangoo. First, get inside the vehicle and begin disassembling and removing the entire dashboard; to do this, it will be necessary to remove all its components, including the instrument cluster, the radio, the climate control switches, and the glove compartment, as shown in the video.

Unscrew all the fixing screws and disconnect the various electrical wiring to remove the dashboard; this will allow access to the cabin fan by unscrewing the screws and disconnecting the electrical connector; replace the fan with a new one.


Updated on 7 November 2026 by ScegliAuto


Related tutorials

Replacement of the cabin fan of the Renault Kangoo
Renault Kangoo (2007-2021 / MK 2, FC, FW) Today we will discover the instructions that will allow us to disassemble and replace the cabin fan of the Renault Kangoo. First of all, we get on bo…
Disassembly of the Renault Kangoo's cabin fan.
Disassembly of the Renault Kangoo's cabin fan.
Renault Kangoo (2007-2021 / MK 2, FC, FW) Below we will discover the main instructions on how to disassemble and replace the cabin fan of the Renault Kangoo. The cabin fan is located on the t…
Guide to Removing the Cabin Fan on the Renault Kangoo
Guide to Removing the Cabin Fan on the Renault Kangoo
Renault Kangoo (2007-2021 / MK 2, FC, FW) Here are the main instructions that will allow you to dismantle and replace the cabin fan on the Renault Kangoo. To access the cabin fan, you will ne…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos