Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the instrument panel of the Renault Kangoo

Model: Renault Kangoo KC, MK 1, KW - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Instrument cluster

See other generations:
Video tutorial

Below we will see step-by-step instructions on how to disassemble and replace the instrument panel of the Renault Kangoo dashboard. First, we get into the car and start by removing the side cover of the dashboard; we also remove the cover located on the top of the instrument panel, then unscrew all the fixing screws we find underneath, as shown in the video.

At this point, we remove the instrument panel from the dashboard, disconnecting all the electrical connectors we find on the back; we carry out the repair or replacement of the instrument panel!


Posted on 25 September 2025 by ScegliAuto


Related tutorials

Guide to removing the dashboard and the cabin heater radiator of the Renault Kangoo
Guide to removing the dashboard and the cabin heater radiator of the Renault Kangoo
Renault Kangoo (2007-2021 / MK 2, FC, FW) Today's guide will illustrate the steps to remove and replace the dashboard and the cabin heater radiator of the Renault Kangoo. First, get into the …
How to Remove the Starter Motor from a Renault Kangoo
How to Remove the Starter Motor from a Renault Kangoo
Renault Kangoo (2007-2021 / MK 2, FC, FW) Before starting, open the front bonnet of your Renault Kangoo. Begin by removing all the hoses and the air filter housing, unscrewing the respective …
How to Reset the Service Light on a Renault Kangoo
How to Reset the Service Light on a Renault Kangoo
Renault Kangoo (1997-2008 / KC, MK 1, KW) Manually resetting the service light on your first-generation Renault Kangoo (1997-2008) is very simple. Follow these steps to complete the operation…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos