Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Use the Manual Gearbox of a Renault Clio

Model: Renault Clio Clio IV, MK 4, Clio 4 - Years 2012-2019
Part: Transmission

Want to get familiar with the manual gearbox of your Renault Clio? Let's see in this video how to practice correctly: first, enter the vehicle, grasp the gear knob with your hands, and press the clutch. Next, move the gear knob following the numbers on it (when stationary, you can follow the numbers). Learn to make the various shifts with your right hand, coordinating with the clutch pedal. With the car in motion, press the clutch correctly to avoid damaging the gear engagement. Perform the various steps with the engine off.

Updated on 1 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Gearbox Oil on a Renault Clio
How to Change the Gearbox Oil on a Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) To change the gearbox oil on a Renault Clio, raise the car to gain easier access to the components underneath the engine compartment. Locate the gear…
How to reset the oil change on the Clio 5
How to reset the oil change on the Clio 5
Renault Clio (2019-2026 / Clio V, Clio 5) In the following article, we will explain the procedure to reset the oil change indicator light on the Renault Clio 5th series. For this procedure, n…
How do you replace the clutch of the Renault Clio?
How do you replace the clutch of the Renault Clio?
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) To ensure that the clutch replacement on the Renault Clio takes place, it will be necessary to lift the car so that the front wheels are not in conta…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos