Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the control arm on the Renault Clio III

Model: Renault Clio Clio 3, MK 3, Clio III - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Control arm

See other generations:
Video tutorial

In this video we can see how to change the control arm of the Renault Clio III: we start by removing the front wheels and then lifting the car. We immediately find the piece we need to change behind the brake disc, clean all the elements with a wire brush and WD-40, and remove the fixing bolts.

We remove the control arm, helping, if necessary, with a flat chisel to help remove the ball joint; we clean the part well and then install the new control arm; it is very important to perfectly match the ball joint, using double wrenches to tighten it well.

Once repositioned, we can reassemble the wheel, sprinkling the disc with specific cleaner and copper grease, and then lower the car.


Posted on 3 January 2025 by ScegliAuto


Related tutorials

Replacing the Front Wishbone on a Renault Clio
Replacing the Front Wishbone on a Renault Clio
Renault Clio (1998-2005 / MK 2, Clio 2) In this video guide, learn how to remove and replace the wishbone of the suspension on the Renault Clio 2. First, lift the vehicle off the ground and…
Removing the Front Wishbone on Renault Clio
Removing the Front Wishbone on Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) Remove the wheel trims from the front wheels, loosen the wheel bolts, and lift the car with a jack (if you have two, use both, one on each side). Uns…
Localization and diagram of the fuse boxes of the Renault Clio III.
Localization and diagram of the fuse boxes of the Renault Clio III.
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) In this video we can see the fuse box diagram of the Renault Clio III, while describing its location inside the car. The main fuse box is located in …

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos