Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Clio
    4. : Control arm

Renault Clio - Control arm

Control Arm Renault Clio (2005-2013 / mk 3, clio 3, clio iii)

Renault Clio (2005-2013 / MK 3, Clio3, Clioiii)
How to change the control arm on the Renault Clio III
In this video we can see how to change the control arm of the Renault Clio III: we start by removing the front wheels and then lifting the car. We immediately …Read all…
Posted on 3 January 2025 by ScegliAuto
Renault Clio (2005-2013 / MK 3, Clio3, Clioiii)
Removing the Front Wishbone on Renault Clio
Remove the wheel trims from the front wheels, loosen the wheel bolts, and lift the car with a jack (if you have two, use both, one on each side). Unscrew the …Read all…
Posted on 5 May 2026 by ScegliAuto
Renault Clio (1998-2005 / Clio2, MK 2)
Replacing the Front Wishbone on a Renault Clio
In this video guide, learn how to remove and replace the wishbone of the suspension on the Renault Clio 2. First, lift the vehicle off the ground and remove …Read all…
Posted on 13 April 2026 by ScegliAuto
Renault Clio (1998-2005 / Clio2, MK 2)
Replacing the Front Wishbone of a Renault Clio 1.2
Learn how to remove the wishbone of a Renault Clio. Place the car on a column lift and loosen the wheel nuts with a telescopic spanner, then remove the wheel. …Read all…
Posted on 5 April 2026 by ScegliAuto
Renault Clio (1998-2005 / Clio2, MK 2)
Replacement of Suspension Wishbones
The failure of the support bushes (silent blocks) of the suspension wishbones and the corresponding ball joint connecting the wishbone to the hub is quite …Read all…
Posted on 25 February 2026 by ScegliAuto
Renault Clio (1998-2005 / Clio2, MK 2)
Replacing the Gearbox Mount and Modification
If during starting and stopping or while the engine is under load, the gear lever oscillates significantly and a strong vibration is felt, the cause is likely …Read all…
Posted on 16 February 2026 by ScegliAuto

Control Arm Renault Clio (1998-2005 / clio 2, mk 2)

Renault Clio (2005-2013 / MK 3, Clio3, Clioiii)
How to change the control arm on the Renault Clio III
In this video we can see how to change the control arm of the Renault Clio III: we start by removing the front wheels and then lifting the car. We immediately …Read all…
Posted on 3 January 2025 by ScegliAuto
Renault Clio (2005-2013 / MK 3, Clio3, Clioiii)
Removing the Front Wishbone on Renault Clio
Remove the wheel trims from the front wheels, loosen the wheel bolts, and lift the car with a jack (if you have two, use both, one on each side). Unscrew the …Read all…
Posted on 5 May 2026 by ScegliAuto
Renault Clio (1998-2005 / Clio2, MK 2)
Replacing the Front Wishbone on a Renault Clio
In this video guide, learn how to remove and replace the wishbone of the suspension on the Renault Clio 2. First, lift the vehicle off the ground and remove …Read all…
Posted on 13 April 2026 by ScegliAuto
Renault Clio (1998-2005 / Clio2, MK 2)
Replacing the Front Wishbone of a Renault Clio 1.2
Learn how to remove the wishbone of a Renault Clio. Place the car on a column lift and loosen the wheel nuts with a telescopic spanner, then remove the wheel. …Read all…
Posted on 5 April 2026 by ScegliAuto
Renault Clio (1998-2005 / Clio2, MK 2)
Replacement of Suspension Wishbones
The failure of the support bushes (silent blocks) of the suspension wishbones and the corresponding ball joint connecting the wishbone to the hub is quite …Read all…
Posted on 25 February 2026 by ScegliAuto
Renault Clio (1998-2005 / Clio2, MK 2)
Replacing the Gearbox Mount and Modification
If during starting and stopping or while the engine is under load, the gear lever oscillates significantly and a strong vibration is felt, the cause is likely …Read all…
Posted on 16 February 2026 by ScegliAuto
Cigarette lighter (1) Airbag (26) Alternator (10) Speaker (11) Shocks (14) Antenna (7) Air conditioning (3) Car stereo (72) Anti-roll bar (3) Roof rack bars (2) Battery (23) Ignition coil (3) Air vents (4) Bushings (2) Control arm (6) Transmission (3) Spark plugs (17) Glow plugs (4) Body (28) Glove compartment (3) Control unit (5) Key (100) Timing belt (36) V-belt (11) Air conditioner (1) A/C controls (2) Onboard computer (44) Checks and maintenance (115) Throttle body (4) Dashboard (18) Bearing (5) MAF sensor (3) Brake rotors (4) Rear bench seat (1) Headlight (41) Tail light (24) Fog lights (8) Air filter (53) Cabin air filter (45) Fuel filter (5) Diesel fuel filter (23) Oil filter (9) Parking brake (13) Clutch (5) Grille (2) Fuel injectors (4) Window switch (5) Accessory kit (10) Light bulb (24) Side marker bulb (3) Headlight bulb (59) Tail light bulb (24) Interior dome light bulb (13) Antifreeze coolant (3) Instrument panel light (6) License plate light (9) (4) Handle (11) Engine (4) Power window motor (8) Starter motor (18) Transmission fluid (7) Brake fluid (1) Engine oil (27) Power steering fluid (1) Clock (45) Door trim panel (38) Windshield (1) Front bumper (18) Rear bumper (8) Brake pads (16) Tires (3) Shift knob (36) Pump (4) Fuel pump (6) Car door (8) Push button (4) Power window switch (3) Instrument cluster (26) Radiator (1) Heater core (2) Wheel (19) Fuse box (155) Seat (23) Axle shaft (1) Crankshaft position sensor (2) Parking sensors (2) Door lock (13) Suspension system (3) Side mirror (28) Rearview mirror (2) AdBlue warning light (9) Warning light – error code (98) (80) Tire pressure warning light (34) Service warning light (259) Manufacturer emblem (4) Brake drums and shoes (6) Fuel cap (11) Windshield wipers (33) Thermostat (3) Cylinder head (1) Tie rods (3) Oil vapor hose (1) Center console tunnel (1) Turbocharger (1) Valve (3) EGR valve (12) Blower motor (24) Side window (6) Steering wheel (12)

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos