Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Wishbone on a Renault Clio

Model: Renault Clio MK 2, Clio 2 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Control arm

See other generations:
Video tutorial

In this video guide, learn how to remove and replace the wishbone of the suspension on the Renault Clio 2. First, lift the vehicle off the ground and remove the affected front wheel. Then, undo the nut of the suspension wishbone using two spanners: one on the upper nut and the other on the lower nut to keep it steady.

Use a sturdy lever on the wishbone and remove the bolt. At this point, disconnect the brake system from the wishbone.

Remove the bolt from the joint and proceed with extracting the suspension wishbone!


Updated on 19 March 2026 by ScegliAuto


Related tutorials

Removing the Front Wishbone on Renault Clio
Removing the Front Wishbone on Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) Remove the wheel trims from the front wheels, loosen the wheel bolts, and lift the car with a jack (if you have two, use both, one on each side). Uns…
Replacing the Front Wishbone of a Renault Clio 1.2
Replacing the Front Wishbone of a Renault Clio 1.2
Renault Clio (1998-2005 / MK 2, Clio 2) Learn how to remove the wishbone of a Renault Clio. Place the car on a column lift and loosen the wheel nuts with a telescopic spanner, then remove t…
Replacing the Front Headlamp and Bulb on the Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) This guide shows you how to remove and replace the front headlamp and its bulbs on the Renault Clio. First, open the bonnet and start by detaching an…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos