Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the glow plugs on Renault Master II

Model: Renault Master MK 2 - Years 1997-2010
Part: Glow plugs

In this video we can see how to change the glow plugs of a Renault Master II: we remove the air intake, cover it with a cloth so that nothing goes inside the tubing, and also move the air filter. We then remove the coolant tank. Now we remove the rubber caps of the glow plugs, and clean them with a jet of compressed air. We then spray WD-40 to facilitate the removal of the glow plugs, which we will extract with a 10mm ratchet wrench. We can find the set of four glow plugs for example on E-Bay with the code 275391819303 at the price of 26.33 euros + 1.90 euros for shipping costs. Before putting them back in place, grease them with ceramic grease, then position them and tighten them well (but not too tight), grease the caps with electronic spray and reposition them. Put the coolant tank back in place, the air filter and reconnect the tubing. Operation completed.

Posted on 16 January 2025 by ScegliAuto

Video tutorial

Related tutorials

Renault Master (2010-2023 / MK 3) If you need to replace the rear headlight bulb of your Renault Master, but you don't know how to do it, then you just have to carefully read the foll…
Renault Master (2024-2026 / MK 4, XDD) In this video, we will learn how to independently replace a bulb in the Renault Master 4, specifying that the vehicle used in the aforementioned vide…
Renault Master (1997-2010 / MK 2) The battery of our Renault Master is located under the driver's seat. To reach it, we will have to start by opening the driver's door. Then, we will …

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos