Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the air filter in the Renault Master van?

Model: Renault Master MK 3 - Years 2010-2023
Part: Air filter

In this tutorial, we can see how to replace the air filter in the Renault Master van, an extremely simple and quick operation. First of all, make sure that the engine is cool enough, then open the hood and locate the airbox, which is behind the right headlight. Next, unscrew the two screws indicated using a Torx T25 key, lift the box and remove the old filter. At this point, all that remains is to clean the inside of the housing from any dirt residue, insert the replacement and reassemble everything following the reverse procedure.

Posted on 7 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Radiator in the Renault Master Van
How to Replace the Radiator in the Renault Master Van
Renault Master (2010-2023 / MK 3) In this tutorial, you will see how to replace the radiator in the Renault Master van, a task that requires good manual skills. First, open the bonnet…
How to Replace the Remote Battery of the Renault Master Van?
How to Replace the Remote Battery of the Renault Master Van?
Renault Master (1997-2010 / MK 2) In this tutorial, you will see how to replace the remote battery of the Renault Master van, a very simple and quick operation. You will need a replac…
How to Replace the Rear Brake Pads on a Renault Master Van?
How to Replace the Rear Brake Pads on a Renault Master Van?
Renault Master (2010-2023 / MK 3) In this tutorial, you will see how to replace the rear brake pads on a Renault Master van. This operation is straightforward but requires good manual…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos