Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Diesel Filter in a Renault Master Van?

Model: Renault Master MK 3 - Years 2010-2023
Part: Diesel fuel filter

In this tutorial, you will see how to replace the diesel filter in the Renault Master van, a very simple and quick operation. First, ensure that the engine is cool enough to work safely, then open the bonnet, locate the filter, and unscrew the top screw with a Torx T30 key. Next, remove the cap, extract the old filter, and insert the replacement. At this point, simply reassemble everything, unscrew the indicated valve, pump the fuel until it starts to come out of the valve, and tighten it.

Posted on 3 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Fuel Filter on a Renault Master 2022
How to Change the Fuel Filter on a Renault Master 2022
Renault Master (2010-2023 / MK 3) Here’s how to change the fuel filter on a Renault Master with M9T 2.3 diesel engine. The filter is located on the right side of the engine bay (from …
How to replace the air filter in the Renault Master van?
How to replace the air filter in the Renault Master van?
Renault Master (2010-2023 / MK 3) In this tutorial, we can see how to replace the air filter in the Renault Master van, an extremely simple and quick operation. First of all, make sur…
How to replace the fuel filter on the Renault Master 2
How to replace the fuel filter on the Renault Master 2
Renault Master (2010-2023 / MK 3) The worn fuel filter can prevent the vehicle from starting properly and signal a problem with the engine through the corresponding warning light. In …

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos