Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fan Resistor on Renault Clio

Model: Renault Clio MK 2, Clio 2 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Blower motor

See other generations:
Video tutorial

How to replace the fan resistor on a Renault Clio. In this guide, see how to perform the removal. Use a lever to remove the plastic cover under the front windscreen.

Use a screwdriver to undo the cover over the resistor. Disconnect the large connector from the resistor, then extract it from the cabin.

Insert a new fan resistor (connect the power connector). Finally, refit the cover and tighten the screws.

Check the correct installation of the previously fitted parts and test their proper functioning.


Updated on 1 March 2026 by ScegliAuto


Related tutorials

Removing the Air Conditioning Fan Resistor on the Renault Clio 3
Removing the Air Conditioning Fan Resistor on the Renault Clio 3
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) In this video tutorial, learn how to remove the air conditioning fan resistor on the third series Renault Clio in simple and quick steps. First, get …
How to Replace the Heater Fan on Renault Clio
How to Replace the Heater Fan on Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) This guide shows how to replace the fan on a Renault Clio. Remove the plastic cover under the front windscreen using a lever, then unscrew the cover …
How to Reset the "Service" Light on a Renault Clio
How to Reset the "Service" Light on a Renault Clio
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) Before you begin, sit in the driver's seat of your Renault Clio. Start by activating the instrument panel. Next, select the "Service Interval" option…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos