Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Air Conditioning Fan Resistor on the Renault Clio 3

Model: Renault Clio Clio 3, MK 3, Clio III - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013

See other generations:
Video tutorial

In this video tutorial, learn how to remove the air conditioning fan resistor on the third series Renault Clio in simple and quick steps. First, get inside the vehicle on the driver's side and start by removing all the plastics under the steering wheel to access the cabin fan; then locate the resistor, which is attached to the fan. At this point, use a screwdriver or a Torx key to unscrew the fixing screws, then disconnect the electrical connector; finally, remove it and replace it with the new one!


Updated on 21 April 2026 by ScegliAuto


Related tutorials

How to Replace the Fan Resistor on Renault Clio
How to Replace the Fan Resistor on Renault Clio
Renault Clio (1998-2005 / MK 2, Clio 2) How to replace the fan resistor on a Renault Clio. In this guide, see how to perform the removal. Use a lever to remove the plastic cover under the f…
How to replace the cabin fan resistor in a Renault Clio
How to replace the cabin fan resistor in a Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) The following steps will illustrate the procedure for disassembling and replacing the blower resistor of the Renault Clio's cabin fan. First, we open…
How to Replace the Heater Fan on Renault Clio
How to Replace the Heater Fan on Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) This guide shows how to replace the fan on a Renault Clio. Remove the plastic cover under the front windscreen using a lever, then unscrew the cover …

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos