Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the rear lights of the Renault Trafic 2?

Model: Renault Trafic MK 2 - Years 2001-2014
Part: Tail light

The work mentioned above can also be done by yourself, it is not considered complex and does not require, if we want, to turn to a workshop. Now let's watch the video tutorial attached here and get inspiration on how to do the job: we open the rear door, locate the fixing screws of the aforementioned taillight, unscrew them and then we return externally to the vehicle, starting to pull in different points, precisely, the taillight. Not only will we detach the latter but also a part of the bodywork attached to it, concluding everything by disconnecting the rear connector of the power cables.

Posted on 21 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the rear lights in the Renault Trafic van?
How to disassemble the rear lights in the Renault Trafic van?
Renault Trafic (2001-2014 / MK 2) In this tutorial we can see how to disassemble the rear lights in the Renault Trafic van, an extremely simple and quick operation, to be carried out …
How to Remove the Rear Doors of the Renault Trafic
How to Remove the Rear Doors of the Renault Trafic
Renault Trafic (2001-2014 / MK 2) Today, we will go through the main instructions on how to remove and replace the rear doors of the Renault Trafic. First, open the rear doors and sta…
How to remove the rear seats of a Renault Trafic
How to remove the rear seats of a Renault Trafic
Renault Trafic (2001-2014 / MK 2) Before we can start, we will have to go and open the side door of our Renault Trafic. So let's start by unhooking the lower lateral hooks that secure…

How to Replace the Timing Belt on a Chevrolet Matiz

How to replace the timing belt on a Chevrolet Matiz. Open the bonnet and secure it, lift the car on a column lift (if necessary, remove the front wheel using a screwdriver to take off the right wheel arch liner). Use a fixed spanner to loosen the tensioner pulley and slide the belt off its seat. Use a socket spanner to undo the securing bolt of the tensioner pulley, then remove the water pump as shown in the video. Fit the new water pump, the tensioner, and the belt itself, tightening everything with the socket spanner. Finally, refit the rivets along with the wheel arch liner and reattach the wheel with the tyre to the vehicle.

Watch the video!


by ScegliAuto

More videos