Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Doors of the Renault Trafic

Model: Renault Trafic MK 2 - Years 2001-2014
Part: Car door

Today, we will go through the main instructions on how to remove and replace the rear doors of the Renault Trafic. First, open the rear doors and start unscrewing the fixing screws found on the hinges, located at the top and bottom. Remove the rear lights and disconnect the electrical connectors from the inside, as shown in the video. At this point, remove the two rear doors, carrying out repairs or replacements as necessary; securely fix the doors and adjust their height, ensuring they close properly, following the video tutorial to the end!

Posted on 24 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Seats of the Renault Trafic
How to Remove the Rear Seats of the Renault Trafic
Renault Trafic (2014-2026 / MK 3) In this guide, follow these simple steps to remove all the rear seats from the Renault Trafic. First, open the rear doors and the sliding side doors …
How to Remove the Rear Seats of a Renault Trafic
How to Remove the Rear Seats of a Renault Trafic
Renault Trafic (2001-2014 / MK 2) Before you begin, open the side door of your Renault Trafic. Start by unfastening the lower side hooks that secure the rear seats to the floor. Then,…
Removing the Rear Bench Seats of the Renault Trafic
Removing the Rear Bench Seats of the Renault Trafic
Renault Trafic (2001-2014 / MK 2) In this brief guide, follow the steps to remove the rear bench seats of the Renault Trafic. First, open the rear doors and start by reclining the sea…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos