Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the external rearview mirror of the Renault Scenic 2

Model: Renault Scenic Scenic 2, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Side mirror

See other generations:
Video tutorial

In the following guide aimed at all of you who own a second series Renault Scenic, we will discover the steps you need to take if you want to disassemble the entire rearview mirror by yourself. First of all, make sure the car is turned off, then get a screwdriver with a cross head and open the door on the side of the mirror to be removed.

Then use the screwdriver to unscrew the screw holding the mirror in place and then pull it towards you. Finally, disconnect the electrical connector and the procedure is complete.


Posted on 15 March 2025 by ScegliAuto


Related tutorials

How to remove and replace the exterior rearview mirror of the Renault Scenic.
How to remove and replace the exterior rearview mirror of the Renault Scenic.
Renault Scenic (2016-2022 / Scenic IV, Scenic 4, MK IV, MK 4) Briefly, we will see the instructions on how to dismantle and replace the external rearview mirror of the Renault Scenic. First, let's open the front…
Removing and Replacing the External Wing Mirror of the Renault Scenic
Removing and Replacing the External Wing Mirror of the Renault Scenic
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) Today's instructions will guide you on how to remove and replace the external wing mirror of the Renault Scenic in simple steps. First, open the fron…
How to Replace the External Wing Mirror on a Renault Scenic
How to Replace the External Wing Mirror on a Renault Scenic
Renault Scenic (2003-2009 / Scenic 2, MK 2) To remove the external wing mirror on a Renault Scenic, open the corresponding door and loosen the screw located on the inside part of the mirror. On…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos