Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service indicator light on the Renault Triber

Model: Renault Renault Various
Part: Service warning light

In the following guide, we will help you properly complete the manual reset of the service light on the display of your Renault Triber. First of all, enter the cabin and start the instrument panel, then locate the small button to the right of the display and press it several times until the "Service interval" message appears. At this point, you must hold down the same button used earlier and wait for the manual reset of the service light to be completed. Finally, release the button and turn off the instrument panel of your Renault Triber.

Posted on 28 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Renault Triber
How to reset the service light on the Renault Triber
Renault Renault Various If you own a Renault Triber and want to learn how to correctly perform a manual reset of the service light, then all you have to do is read the follo…
How to Reset the Service Light on the Renault Triber
How to Reset the Service Light on the Renault Triber
Renault Renault Various In this new mini guide dedicated to all of you who own a Renault Triber, we will discover the steps to properly complete the manual reset of the serv…
How to Reset the Service Light on a Renault Triber
How to Reset the Service Light on a Renault Triber
Renault Renault Various To reset the service light on a 2021 Renault Triber, first turn on the vehicle's instrument cluster without starting the engine. Next, press the butt…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos