Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you disassemble the rearview mirror of the Renault Megane 4?

Model: Renault Megane Megane 4, Megane IV - Years 2015-2023
Part: Rearview mirror

Before proceeding with the video tutorial, it is worth noting that the car used in the tutorial is a Renault Megane 2, but since the operational methods are the same for many other cars, it also applies to the Renault Megane 4. With that clarified, let's move on to the execution of the task: First, the two plastic front and rear covers of the mirror need to be removed by applying pressure with your hands at the locking points. Then, grab the mirror with your hands and push it to slide along the channel that holds it fixed to the windshield. Task completed.

Posted on 24 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the External Wing Mirror on the Renault Megane
How to Replace the External Wing Mirror on the Renault Megane
Renault Megane (2002-2010 / Megane 2) Follow the necessary steps to remove and replace the external wing mirror on the Renault Megane. First, open the front door and start by removing the…
How to Remove the External Rear-View Mirror of the Renault Megane
How to Remove the External Rear-View Mirror of the Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) Today, follow these step-by-step instructions to remove and replace the external rear-view mirror of the Renault Megane. First, open the front door o…
Replace the Internal Rear View Mirror of the Megane
Replace the Internal Rear View Mirror of the Megane
Renault Megane (2008-2015 / Megane III, Megane 3) Replace the internal rear view mirror of the Megane? Remove the covering plastics around the base of the mirror (if present), then grasp the mirror o…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos