Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Renault Captur?

Model: Renault Captur MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Service warning light

See other generations:
Video tutorial

On the display of the Renault Captur, it will be possible to completely make the Service light disappear by turning on the ignition after the ignition key has been inserted into the corresponding block: once this has been activated, it will be possible to repeatedly press the upper button located at the end of the lever on the right side of the steering wheel.

When the maintenance message appears, you must hold down the button at the bottom of the lever: then you can wait a few seconds to make the light disappear permanently.


Posted on 17 June 2025 by ScegliAuto


Related tutorials

How to reset the service light on the Renault Captur
How to reset the service light on the Renault Captur
Renault Captur (2019-2026 / MK 2) After replacing the engine oil, it will be necessary to reset the service maintenance light; let's see the reset procedure on the Renault Captur. Fir…
Resetting the Service Light on a Renault Captur
Resetting the Service Light on a Renault Captur
Renault Captur (2019-2026 / MK 2) Through these instructions, you will see how to reset the service light for the regular maintenance oil change on a Renault Captur. First, get into t…
Resetting the Service Light on a Renault Captur
Resetting the Service Light on a Renault Captur
Renault Captur (2019-2026 / MK 2) Below are the instructions to reset the service light for the regular maintenance oil change on a Renault Captur, as well as the Clio. First, get in …

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos