Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the front headlight bulb of the Renault Modus?

Model: Renault Modus MK 1 - Years 2004-2013
Part: Headlight bulb

Turning on the lights, whether it be the position lights, high beams or low beams, and realizing that one of them is burnt out in the Renault Modus should not be discouraging, the remedy is simple, quick and do-it-yourself. We need to get the replacement bulb and proceed with the replacement, optionally using this tutorial for guidance, skipping the initial part related to other interventions. Opening the hood, we reach in and access the rear cap of the headlight, unscrew it, grab the bulb holder and pull it out of the headlight assembly. From the latter, we disconnect the aforementioned burnt out bulb and replace it.

Posted on 26 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the headlight bulb of the Renault Modus?
How do you replace the headlight bulb of the Renault Modus?
Renault Modus (2004-2013 / MK 1) To ensure that the headlight bulb of the Renault Modus is replaced, it will be necessary to open the hood in order to access the components inside th…
Replace the Bulb and Headlamp of the Renault Modus
Replace the Bulb and Headlamp of the Renault Modus
Renault Modus (2004-2013 / MK 1) This guide outlines the procedure necessary for removing and replacing the headlamp and bulb of the front headlamp of the Renault Modus. First, open …
Replacement of the front headlight bulb of the Renault Modus
Replacement of the front headlight bulb of the Renault Modus
Renault Modus (2004-2013 / MK 1) Today's steps will show us how to disassemble and replace the headlight bulb of the Renault Modus, following the instructions below. First, we open t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos