Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front parking sensors of the Renault Espace

Model: Renault Espace MK 4 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Parking sensors

See other generations:
Video tutorial

In this short guide, we will see the instructions that will allow us to disassemble and replace the front parking sensors of the Renault Espace. First, move to the front of the vehicle and start removing the plastic panel under the bumper; this way you will be able to access the parking sensors, which we will unhook and remove (disconnecting the electrical connector), as shown in the video.

At this point, replace the faulty parking sensors with new ones, fixing them correctly; all that's left is to check their operation!


Posted on 11 August 2025 by ScegliAuto


Related tutorials

Where are the fuses located in the Renault Espace?
Where are the fuses located in the Renault Espace?
Renault Espace (2002-2014 / MK 4) The appropriate fuse boxes installed on the Renault Espace are designed to contain the fuses that manage the devices on the vehicle: in this type of …
Where is the OBD port located in the Renault Espace 2010?
Where is the OBD port located in the Renault Espace 2010?
Renault Espace (2002-2014 / MK 4) Locating the OBD port of your 2010 Renault Espace is really simple and you just need to follow the steps described in this new mini guide aimed at yo…
How to replace the air filter of the Renault Espace 4
How to replace the air filter of the Renault Espace 4
Renault Espace (2002-2014 / MK 4) In this new mini guide, we will explain the various steps you need to follow if you intend to replace the engine air filter of your fourth series Ren…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos