Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the fan resistor of the air conditioning on a 2006 Renault Clio 3.

Model: Renault Clio MK 3, Clio 3, Clio III - Years 2005-2013
Part: Blower motor

Today we will explain how to replace the fan resistor of the air conditioning on a 2006 Renault Clio 3 independently. We start the replacement by getting on board the vehicle and removing part of the lower and side dashboard on the passenger side of the vehicle, using a plastic removal tool or a flathead screwdriver. After removing the plastics, we remove the glove compartment by unscrewing the screws. Behind the compartment on the left side, the air conditioning fan is mounted. We unscrew the two screws that secure the fan and disconnect the connector. Using a flathead screwdriver, we disconnect the resistor from the fan. Before proceeding with the installation, we remove the lower dashboard on the driver's side. We remove the fuse box and access the air conditioning fan. We disconnect the connector from the fan and remove the resistor, disconnecting the connector. We clean the tips of the resistor, damaged by rust, and mount the resistor on the fan. We mount the fuse box and the lower dashboard. We mount the fan on the passenger side and connect the connector. We mount the glove compartment and the lower and side parts of the dashboard.

Posted on 17 August 2025 by ScegliAuto

Video tutorial

Related tutorials

Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) This guide shows how to replace the fan on a Renault Clio. Remove the plastic cover under the front windscreen using a lever, then unscrew the cover …
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) The following steps will illustrate the procedure for disassembling and replacing the blower resistor of the Renault Clio's cabin fan. First, we open…
Renault Clio (1998-2005 / Clio 2, MK 2) How to replace the fan resistor on a Renault Clio. In this guide, see how to perform the removal. Use a lever to remove the plastic cover under the f…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos