Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the license plate on a Renault vehicle

Model: Renault Renault Various

Removing the license plate on a Renault vehicle is a simple and quick operation to be carried out independently. It is not necessary to use any tools to perform the operation. You just need to position yourself in front of the license plate and remove the bottom part, simply by pulling it out. After removing the bottom part of the license plate cover, we can lower the plate and remove it from its seat. By performing this operation, we can replace the plate, remove the entire block, or clean the plate in case dirt has accumulated and the plate is no longer readable. The assembly follows the reverse procedure, in fact, to mount the plate we must insert it into its seat, push it upwards, and mount the lower cover.

Posted on 20 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to perform a general reset on a 2014 Renault vehicle
How to perform a general reset on a 2014 Renault vehicle
Renault Renault Various Today we will explain how to perform a general reset on a 2014 Renault vehicle. To perform this operation, we must remove the key from the ignition l…
How to replace the key battery on a Renault vehicle
How to replace the key battery on a Renault vehicle
Renault Renault Various Today we will explain how to replace the battery of the key on a Renault vehicle. On this type of key in card mode, the operation is the same. To per…
How to replace the battery of a Renault vehicle key
How to replace the battery of a Renault vehicle key
Renault Renault Various When it comes to replacing the battery of the key/remote of a Renault vehicle, the steps to follow are almost always the same, simple and quick. To r…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos