Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the external handle of the rear tailgate of the Renault Master?

Model: Renault Master MK 4, XDD - Years 2024-2026
Part: Handle

In order to replace the external handle of the rear tailgate of the Renault Master, you need to open the corresponding tailgate so that the internal lining panel can be completely detached: once this panel has been removed, you can proceed by loosening the screws that secure the internal operating mechanism and disconnecting the connected cables. At this point, you can then position the new handle from the outside, connecting it to the internal mechanism: then you will need to cover everything again with the panel, making sure that everything works properly.

Posted on 28 October 2025 by ScegliAuto

Video tutorial

Related tutorials

Removing the Rear Tailgate Handle on a Renault Master
Removing the Rear Tailgate Handle on a Renault Master
Renault Master (2010-2023 / MK 3) Today, let’s go through the steps to remove and replace the external handle of the rear tailgate on a Renault Master. First, open the rear tailgate a…
How to replace the rear tailgate handle on the Renault Master
How to replace the rear tailgate handle on the Renault Master
Renault Master (2010-2023 / MK 3) These brief and simple steps will allow you to remove and replace the external opening handle of the rear tailgate on the Renault Master. First, open…
How to Replace the External Handle on a Renault Master
How to Replace the External Handle on a Renault Master
Renault Master (1997-2010 / MK 2) You can replace the external handle on the Renault Master by opening the door with the handle you intend to replace. Once the door is open, locate th…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos