Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear tailgate handle on the Renault Master

Model: Renault Master MK 3 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Handle

See other generations:
Video tutorial

These brief and simple steps will allow you to remove and replace the external opening handle of the rear tailgate on the Renault Master. First, open the rear tailgate and start removing the interior trim by unscrewing the fixing screws; then, remove the internal rivets of the handle, taking it off from the outside, as shown in the video.

At this point, carry out the repair or replacement of the opening handle, securing it properly to the rear tailgate; finally, reassemble the interior trim!


Posted on 8 May 2026 by ScegliAuto


Related tutorials

How to Remove the Sliding Door Panel on a Renault Master
Renault Master (2010-2023 / MK 3) Here’s how to remove the handle from the tailgate on a Renault Master. To remove the lock, you need to take off the internal panel of the tailgate. O…
How to Replace the Outer Door Handle of the Front Door on the Renault Master
How to Replace the Outer Door Handle of the Front Door on the Renault Master
Renault Master (2010-2023 / MK 3) In this guide, you will find instructions to dismantle and replace the outer door handle of the front door on the Renault Master. First, open the fro…
How to Replace the External Handle on a Renault Master
How to Replace the External Handle on a Renault Master
Renault Master (1997-2010 / MK 2) You can replace the external handle on the Renault Master by opening the door with the handle you intend to replace. Once the door is open, locate th…

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos