Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tpms light on the Renault Koleos

Model: Renault Koleos MK 2 - Years 2016-2024
Part:

The following video tutorial shows us how to reset the tire monitoring system on a Renault Koleos vehicle to drive safely. The recommended PSI value from the manufacturer is usually found on a square sticker located on the bottom of the front left door of the vehicle. It is important to inflate the tires following the instructions and release some air so that the recommended pressure is not exceeded. Then we reset the warning light, turn on the instrument panel and select the car settings by pressing the menu button. Select the tire calibration option to update the pressure and press the OK button for the entire duration of the update. When the update is complete, release the button and drive the vehicle at a moderate speed for a few minutes to complete the update procedure.

Posted on 7 November 2025 by ScegliAuto

Video tutorial

Related tutorials

Resetting the Tyre Pressure Warning Light on the Renault Koleos
Resetting the Tyre Pressure Warning Light on the Renault Koleos
Renault Koleos (2016-2024 / MK 2) This guide explains how to reset the tyre pressure monitoring system (TPMS) warning light on the Renault Koleos. Before performing the reset, ensure …
How to reset the service light on the 2018 Renault Koleos.
How to reset the service light on the 2018 Renault Koleos.
Renault Koleos (2016-2024 / MK 2) To reset the service light, related to the car service, on a 2018 Renault Koleos vehicle, we need to turn on the instrument panel and press the menu …
How to disassemble the rear bumper of the Renault Koleos
How to disassemble the rear bumper of the Renault Koleos
Renault Koleos (2008-2015 / MK 1) Removing the rear bumper of your first-generation Renault Koleos may seem like a very complex operation and not feasible without the help of a profes…

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos