Do it yourself
Frequently asked questions about cars and motorcycles

Renault Arkana: How to Reset Tyre Pressure with the Inflation Kit

Model: Renault Arkana MK 1 - Years 2019-2026
Part: Tires

On the Renault Arkana, the inflation kit replaces the spare wheel and allows for the repair of only minor punctures, with a tread cut of less than 4 mm. Before using it, ensure that the damage falls within this limit and that the sidewall of the tyre is not damaged. After safely parking, position the kit near the flat tyre and prepare the compressor by connecting it to the sealant bottle following the instructions on the kit label. The delivery hose should then be screwed onto the tyre valve. Before inflating, check the label on the driver’s side door pillar for the recommended pressure for that tyre size: the manufacturer recommends not going below 1.8 bar, and during the use of the kit, the pressure should remain between 1.3 bar and the recommended value. By activating the compressor, the sealant is pushed into the tyre, and the tyre gradually regains pressure. Once the indicated value on the label is reached, you can remove the kit, close the valve, and resume driving at a moderate speed to ensure the sealant is evenly distributed inside the tyre.

Posted on 28 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Renault Arkana (2019-2026 / MK 1) In the Renault Arkana, to reset the maintenance warning after an oil change, park the Renault Arkana and turn on the instrument panel without startin…
Renault Arkana (2019-2026 / MK 1) You can completely clear the tyre pressure warning light on the Renault Arkana by inflating the tyres to the optimal pressure value: this value is in…
Renault Arkana (2019-2026 / MK 1) In order to reset the tire pressure warning light on the Renault Arkana, you must inflate the tires to the recommended pressure value: this value is …

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos