Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the TPMS of the Renault Arkana

Model: Renault Arkana MK 1 - Years 2019-2026
Part: Tire pressure warning light

In this article we will see how to reset the TPMS light or tire pressure of the Renault Arkana. The procedure takes little time to be completed and no tools are needed. To reset this light, we should first start the instrument panel, then press the appropriate menu button on the right side of the steering wheel to access the vehicle menu. Once we have access to this menu, use the arrow button to navigate the menu until you find the tire pressure light. Once identified, press and hold the ok button for 5 seconds to reset this light, wait for the light to reset with the confirmation message. At this point the procedure will be complete.

Posted on 20 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service and tire pressure on the Renault Arkana.
How to reset the service and tire pressure on the Renault Arkana.
Renault Arkana (2019-2026 / MK 1) In the Renault Arkana, to reset the maintenance warning after an oil change, park the Renault Arkana and turn on the instrument panel without startin…
How to reset the TPMS light on the Renault Arkana
How to reset the TPMS light on the Renault Arkana
Renault Arkana (2019-2026 / MK 1) When the TPMS light comes on in a Renault Arkana vehicle, it means that the tire pressure needs to be adjusted. To adjust the pressure correctly, we …
How to Reset the TPMS Light on a Renault Arkana
How to Reset the TPMS Light on a Renault Arkana
Renault Arkana (2019-2026 / MK 1) Today's video tutorial shows the steps to reset the TPMS light for the tyres on a Renault Arkana produced from 2019 onwards independently. Press the …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos