Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Fit the Spare Wheel on a Renault Arkana

Model: Renault Arkana MK 1 - Years 2019-2026
Part: Wheel

In this video tutorial, you can see how to fit the spare wheel on a Renault Arkana by following some simple steps: in case of a puncture, ensure the vehicle is parked away from traffic on a flat, non-slip, and stable surface. Apply the handbrake and engage a gear; if the vehicle has an automatic gearbox, place the lever in "P". If parked at the roadside, remember to alert other road users by placing the warning triangle. To access the spare wheel, remove the movable floor and lift the boot mat; unscrew the central fastening and extract the spare wheel. To remove the wheel, loosen the nuts without completely unscrewing them. Lift the car using the jack, positioning it as close as possible to the affected wheel. Once the wheel is off the ground, fully unscrew the wheel nuts and remove the wheel from its hub. Position the spare wheel on the central hub and rotate it so that the fixing holes on the wheel and hub are aligned. Reposition the bolts and tighten them partially, then lower the car and finish tightening the bolts.

Updated on 6 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the spare wheel located in the Renault Arkana?
Where is the spare wheel located in the Renault Arkana?
Renault Arkana (2019-2026 / MK 1) To replace the spare wheel of the Renault Arkana, open the boot to access the components in the luggage compartment: here, lift the carpet that serve…
How to reset the service and tire pressure on the Renault Arkana.
How to reset the service and tire pressure on the Renault Arkana.
Renault Arkana (2019-2026 / MK 1) In the Renault Arkana, to reset the maintenance warning after an oil change, park the Renault Arkana and turn on the instrument panel without startin…
Where is the OBD2 Port in a Renault Arkana?
Where is the OBD2 Port in a Renault Arkana?
Renault Arkana (2019-2026 / MK 1) If you own a Renault Arkana and want to know how to access the OBD2 port of the car, then the following guide is all you need. First, enter the vehic…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos