Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the air filter on the Renault Kadjar

Model: Renault Kadjar MK 1 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Air filter

Video tutorial

Let's see how to replace the air filter on the Renault Kadjar (but also on the Nissan Qashqai and X-Trail): we start by removing the two pins located at the front of the hood. We then need to remove the air intake pipe, so we have to remove the screws holding the pipe, which are all visible; then we lift the nozzle and raise the pipe.

We remove the cover by opening the clips and pulling the filter upwards; usually the container is dirty and needs to be cleaned from dust and residues - but in this case it is immaculate - before putting in the new filter, for which we must pay attention to correctly position the mounting direction.

We then reassemble the air pipe, reconnect the screws we had removed, and finally the clips on the front of the hood.


Posted on 21 November 2025 by ScegliAuto


Related tutorials

How to Replace the Air Filter on the Renault Kadjar 1.2 TCe
How to Replace the Air Filter on the Renault Kadjar 1.2 TCe
Renault Kadjar (2015-2022 / MK 1) In a few simple steps, learn how to remove and replace the engine air filter on the Renault Kadjar 1.2 TCe. First, open the bonnet of the vehicle and…
How to replace the air filter of the Renault Kadjar
How to replace the air filter of the Renault Kadjar
Renault Kadjar (2015-2022 / MK 1) The cabin air filter of the Renault Kadjar is located inside the cabin, specifically under the passenger side glove compartment. To replace the cabin…
How to change the engine air filter of the Renault Kadjar.
How to change the engine air filter of the Renault Kadjar.
Renault Kadjar (2015-2022 / MK 1) To prevent the engine of your Renault Kadjar from overheating abnormally, it is important to regularly replace the appropriate air filter. In the fol…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos